|
|
|
|
|
|
88TC / Bar and Pipe Cradle Truck
|
|
|
Model (88TC) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 88TC)... Move and store pipe, channel, bar stock, barrels, or drums with these
Heavy-Duty Cradle Carts and trucks. A large open design that makes loading and
unloading by fork trucks and slings easy. All welded construction. Ergonomic 20" Bed Height, Less bending means easier loading and
unloading, and keeps material closer to most machine heights. Highly
Maneuverable - Four swivel casters with 6" hard tread phenolic wheels
allow movement in any direction. Useful in tight work areas with long
loads and when moving around corners. Up to 4,000 lbs. Capacity Each. Use for
both transport and storage. Combine multiple units for greater capacity
and to support longer loads. Loads on single units must be centered on
truck. (1966,1967)
|
|
|
|
|
|
|
|
|
|
66ERBST / Bar and Pipe Cradle Truck
|
|
|
Model (66ERBST) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 66ERBST)... Move and store pipe, channel, bar stock, barrels, or drums with these
Heavy-Duty Cradle Carts and trucks. A large open design that makes loading and
unloading by fork trucks and slings easy. Available in 3 sizes. All welded construction. Ergonomic Bed Height, Less bending means easier loading and
unloading, and keeps material closer to most machine heights. Highly
Maneuverable - Four swivel casters with 6" hard tread phenolic wheels
allow movement in any direction. Useful in tight work areas with long
loads and when moving around corners. Up to 3,000 lbs. Capacity Each. Use for
both transport and storage. Combine multiple units for greater capacity
and to support longer loads. Loads on single units must be centered on
truck. (1966,1967)
|
|
|
|
|
|
|
|
|
|
88CR / Bar and Pipe Cradle Truck
|
|
|
Model (88CR) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 88CR)... All welded construction (except casters). 3-Cradle or 4-Cradle trucks with 27" wide x 14" high and 3" x 3/16" thick flat load supports. 3" channel steel frame. Overall height - 28". Heavy-Duty 6" x 2" Phenolic swivel casters on the four corners and 10" phenolic wheels on 1" axels in the center allow for easy maneuverability. Casters are bolted on for ease of replacement. Powder coated gray finish standard. (1966,1967)
|
|
|
|
|
|
|
|
|
|
88CT / Bar and Pipe Cradle Truck
|
|
|
Model (88CT) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 88CT)... All welded construction (except casters). 3-Cradle or 4-Cradle trucks with 27" wide x 14" high and 3" x 3/16" thick flat load supports. 4" channel steel frame. Overall height - 30". Heavy-Duty 8" x 2" Phenolic swivel casters on the four corners and 12" phenolic wheels on 1" axels in the center allow for easy maneuverability. Casters are bolted on for ease of replacement. Powder coated gray finish standard. (1966,1967)
|
|
|
|
|
|
|
|
|
|
33DCC / Bar & Pipe Cradle Truck
|
|
|
Model (33DCC) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 33DCC)... Move and store pipe, channel, bar stock, barrels, or drums with these
Heavy-Duty Cradle Trucks. A large open design that makes loading and
unloading by fork trucks and slings easy. All welded construction.
Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turnabout on its own center. The 4,000
pound units
roll on (2) rigid and (2) swivel glass filled nylon casters with the exception of the 31" truck that rolls on four (4) swivel glass filled nylon. The 10,000 pound carts roll on (2)
rigid steel and (2) swivel phenolic casters. Powder coat
finish standard on steel trucks. (1966,1967)
|
|
|
|
|
|
|
|
|
|
22BCT / Bar & Pipe Cradle Truck
|
|
|
Model (22BCT) - BAR & PIPE CRADLE TRUCKS ; ...
(PRODUCT CODE: 22BCT)... BAR CRADLE TRUCK For easy handling of Bar Stock, Pipe and Tubing. Framed with structural channel, this truck is as rock solid as it looks.
The 3" wide cradles are supported by structural channel on the bottom
and both sides. Cradles are 24" across and 13" deep to accept large
bundles of stock. The 12" phenolic load wheels are known for exceptional
strength and resistance to oil, gasoline and most commonly used
solvents and chemicals. 8" swivel caster at each end and a "tilt
pattern" permits the truck to turn in its own radius. All wheels have
roller bearings. Capacities based on evenly distributed loads. Gray
enamel finish. Shipped assembled. Made in USA. Note: Capacities are based upon evenly distributed loads and Not to be used on Ramps, Slopes or Inclined Surfaces. (1966,1967)
|
|
|
|
|
|
|
|
|
|
88TP / Bar & Pipe Transport Truck
|
|
|
Model (88TP) - BAR & PIPE TRANSPORT TRUCKS ; ...
(PRODUCT CODE: 88TP)... Rugged, all-welded construction with 3 load levels. Structural channel
uprights with 1-1/2" square tube arms have 4-1/2" high stops on ends for
load retention. 12-gauge steel lower deck stores and transports smaller
part, packages, etc. Platform height 11", overall height 59. 8" x 2"
phenolic wheels for ease of movement. Wheel brakes on all four wheels is available as an option to
help prevent unwanted movement. Capacity 4000 lbs. overall, 1300 lbs.
per level evenly distributed. Horizontal storage space (each side): (Top = 6.5"), (Middle = 9.5"), (Bottom = 14.5"). Available with 2 rigid and 2 swivel
casters standard. Optional floor lock and wheel brakes are available. (1966,1967)
|
|
|
|
|
|
|
|
|
|
88UP / Bar & Pipe Transport Truck
|
|
|
Model (88UP) - BAR & PIPE TRANSPORT TRUCKS ; ...
(PRODUCT CODE: 88UP)... Rugged, ( 3-COLUMN ) all-welded construction with 3 load levels. Structural channel
uprights with 1-1/2" square tube arms have 4-1/2" high stops on ends for
load retention. 12-gauge steel lower deck stores and transports smaller
part, packages, etc. Platform height 11", overall height 59. 8" x 2"
phenolic wheels for ease of movement. Wheel brakes on all four wheels is available as an option to
help prevent unwanted movement. Capacity 4,200 lbs. overall, 1300 lbs.
per level evenly distributed. Horizontal storage space (each side): (Top = 6.5"), (Middle = 9.5"), (Bottom = 14.5"). Available with 2 rigid and 2 swivel
casters standard. Optional floor lock and wheel brakes are available. (1966,1967)
|
|
|
|
|
|
|
|
|
|
66TB1 / Bar & Pipe Transport Cart
|
|
|
Model (66TB1) - BAR & PIPE TRANSPORT CART ; ...
(PRODUCT CODE: 66TB1)... Rugged Big 16" Wheel Cart carries a variety of loads, including lumber, tool boxes, and pipe up to
20" diameter. Extra large 16" pneumatic wheels with roller bearings and
4 ply tires roll over the roughest surfaces. Carrier bed is constructed
of 3/16" plate and measures 30" long x 12" x 12". Offset "T" handle
allows for 2 hand grip and greater control of load. Pipe
and tubing measuring up to 20 feet long may now be easily moved by
one person. The V-Groove design keeps loads at the horizontal center
of gravity for maximum stability and safety. Steel
welded construction. (1966,1967)
|
|
|
|
|
|
|
|
|
|
33AFSR / Bar and Pipe "A"-FRAME Truck
|
|
|
Model (33AFSR) - BAR & PIPE "A"- FRAME CART ; ...
(PRODUCT CODE: 33AFSR)... The
portable A-Frame Cart with storage rack is ideal for storage and
transporting pipe, conduit and other types of bar material. Storage arms
extend 12" beyond frame with a clearance of 7.25" between arms. Unit
rolls on (2) rigid and (2) swivel 5" poly-on-steel casters with brakes.
Base is powder coat blue while the storage rack is zinc plated.
Overall deck size is 36"Wide x 72"Long. Storage rack is 66"High with 8 storage
levels. Storage arms extend 12" beyond frame. Distance between storage
arms is 7.25". Maximum capacity is 2,000 lbs. Base is powder coated
blue. Storage rack is zinc-plated. (1966,1967)
|
|
|
|
